e3d online E3D

International, Post/DHL, UPS, Spedition, Andere, Versand nach CH, Versand nach A

Experiment freely. With nozzle swapping this easy, you’re free to experiment with nozzle sizes you might not have used before. Set your 3D printer up for ultra-fine or ultra-thick extrusion widths in no time at all. Print large objects in less time, or tiny objects with high resolution. Frustration-free. Each Revo Nozzle is a preassembled nozzle and heatbreak in one unit, so there’s no hazardous hot tightening and no chance of incorrect assembly. Say goodbye to frustrating HotEnd leaks and enjoy reliable 3D printing! Rapid identification. Identify nozzle sizes at a glance thanks to a colour-coded silicone sock. Plus, each Revo Nozzle has its size engraved into it with easy-to-read numbers, so there are no confusing identification markers to learn! An expanding range. We’re ready to make RapidChange Nozzles in any size. At launch, we’re introducing brass nozzles in 0.25mm, 0.4mm, 0.6mm and 0.8mm, with many more compatible nozzles to follow later. Wear-resistant and high flow variants are already on our roadmap and will follow over time. Please note: RevoTM Nozzles are not compatible with V6-style heaterblocks You may need to adjust the Z offset when changing nozzles

International, Post/DHL, Andere, Versand nach CH, Versand nach A

Swap your 3D printer’s nozzles in less than 60 seconds without tools or hot tightening, just use your fingers! If you can unscrew a tube of toothpaste, you can use a Revo Nozzle. Just screw one in to any Revo cold side and you’re ready to 3D print. Experiment freely: With nozzle swapping this easy, you’re free to experiment with nozzle sizes you might not have used before. Set your 3D printer up for ultra-fine or ultra-thick extrusion widths in no time at all. Print large objects in less time, or tiny objects with high resolution. Frustration-free: Each Revo Nozzle is a preassembled nozzle and HeatBreak in one unit, so there’s no hazardous hot tightening and no chance of incorrect assembly. Say goodbye to frustrating HotEnd leaks and enjoy reliable 3D printing! Rapid identification: Identify nozzle sizes at a glance thanks to a colour-coded silicone sock. Plus, each Revo Nozzle has its size engraved into it with easy-to-read numbers, so there are no confusing identification markers to learn! An expanding range: We’re ready to make RapidChange Nozzles in any size. At launch, we’re introducing brass nozzles in 0.25mm, 0.4mm, 0.6mm and 0.8mm, with many more compatible nozzles to follow later. Wear-resistant and high flow variants are already on our roadmap and will follow over time.

Post/DHL

Experimentieren Sie frei. Mit dem einfachen Wechseln der Düsen können Sie mit Grössen experimentieren, die Sie möglicherweise zuvor nicht verwendet haben. Richten Sie Ihren 3D-Drucker in kürzester Zeit für ultra-feine oder ultra-dicke Extrusionsbreiten ein. Drucken Sie grosse Objekte schnell oder winzige Objekte mit hoher Auflösung. Frustrationsfrei. Jede Revo-Düse ist eine vormontierte Düse und Wärmebrecher in einem, was gefährliches heisses Festziehen und die Möglichkeit einer falschen Montage eliminiert. Verabschieden Sie sich von frustrierenden HotEnd-Leckagen und geniessen Sie zuverlässiges 3D-Drucken! Schnelle Identifikation. Identifizieren Sie Düsen Grössen auf einen Blick mit einem farbcodierten Silikon-Sock. Jede Revo-Düse hat ihre Grösse mit leicht lesbaren Zahlen eingraviert, sodass es keine verwirrenden Identifikationsmarkierungen zu lernen gibt. Ein wachsendes Sortiment. Wir sind bereit, RapidChange-Düsen in jeder Grösse herzustellen. Bei der Einführung stellen wir Messingdüsen in 0,25 mm, 0,4 mm, 0,6 mm und 0,8 mm vor, mit vielen weiteren kompatiblen Düsen, die folgen werden. Abriebfeste und hochdurchflussfähige Varianten sind bereits auf unserem Fahrplan und werden im Laufe der Zeit verfügbar sein. Bitte beachten Sie: Revo-Düsen sind nicht mit V6-Stil Heizblöcken kompatibel. Möglicherweise müssen Sie den Z-Versatz beim Wechseln der Düsen anpassen.

Post/DHL, UPS, Trans-o-Flex, Spedition

Experiment freely. With nozzle swapping this easy, you’re free to experiment with nozzle sizes you might not have used before. Set your 3D printer up for ultra-fine or ultra-thick extrusion widths in no time at all. Print large objects in less time, or tiny objects with high resolution. Frustration-free. Each Revo Nozzle is a preassembled nozzle and heatbreak in one unit, so there’s no hazardous hot tightening and no chance of incorrect assembly. Say goodbye to frustrating HotEnd leaks and enjoy reliable 3D printing! Rapid identification. Identify nozzle sizes at a glance thanks to a colour-coded silicone sock. Plus, each Revo Nozzle has its size engraved into it with easy-to-read numbers, so there are no confusing identification markers to learn! An expanding range. We’re ready to make RapidChange Nozzles in any size. At launch, we’re introducing brass nozzles in 0.25mm, 0.4mm, 0.6mm and 0.8mm, with many more compatible nozzles to follow later. Wear-resistant and high flow variants are already on our roadmap and will follow over time. Please note: RevoTM Nozzles are not compatible with V6-style heaterblocks You may need to adjust the Z offset when changing nozzles